![]() With the appropriate hard drive selected, click the desired FAT, FAT32, or BootIt EMBRM (Extended Master Boot Record Manager) primary partition for installation.Note: Both the booting drive and the drive chosen for installation must have an EMBR. Otherwise, click the Change Disk Type button, then click the EMBR button, and finally click the Yes button to confirm the conversion. If EMBR Partitions is displayed just above the partitions box, an EMBR exists on the drive. If the partition that you want to create or use is not on the booting drive, ensure that the desired drive has an EMBR: Select the desired drive using the Drives drop-down box.Ensure that the booting drive (usually HD0) is an EMBR type disk: Select the booting drive using the Drives drop-down box (if not already selected).In the Work with Partitions dialog box that appears, in the lower-right corner, you'll see the Setup button which only appears in this dialog box when accessed during installation.Read the displayed message indicating that you must ensure that an Extended Master Boot Record (EMBR) exists on hard drive 0 (HD0) and on the drive chosen for installation, and then click OK. ![]() When installing BootIt BM for the first time, upgrading from BootIt NG, or upgrading an earlier version of BootIt BM, when asked how you want the partition chosen, if you click No and decide not to have Setup choose the partition for you, then you must manually complete this procedure to prepare and choose the partition: For general instructions on how to install BootIt BM, please refer to the BootIt BM manual. ![]() This article explains how to choose the BootIt BM installation partition manually. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |